Cracked side window - condensation - repairable?

alanfleming

Full Member

Messages
12
At some point when my van's been laid up, one of the side windows (moulded perspex with air in the middle) has acquired a crack. Then, in last night's thunderstorms, there's been water ingress - there's actually a small pool of water between both layers, and condensation top to bottom.

The crack is on both the inside and outside of the window. I've taped very temporarily.

Is there any way of getting the water and condensation out? The window is one of those that's hinged from the top, two side and two bottom latches, and on a pair of stays that allow opening it to a range of different positions.

Thanks in advance for any help,

-- Alan.
 
these windows normally have a couple of little plugs in the top corners you can dig out to allow water to drain out or evaporate . or you could drill a 4mm hole on the inner behind a catch ,let the water go ,then reseal with a glue gun . for the crack i'd suggest captain tolleys creeping crack cure
 

Users who viewed this discussion (Total:0)

Back
Top