Wheel bolt sizes

[Sonar]

This would be a great help to me if someone could tell me what size wheel nuts i have on my
2003 Fiat Ducato 2003 15 JTD MWB.

I am looking to get some locking wheel nuts but do not have the moho on hand its in storage.

And would like tio get some ordered so as i can fit them when i next collect it .

 

[Burge]

Think you would be better off getting a Disklock for the Steering wheel & a decent Wheel Clamp like a Nemesis or Bulldog as I've seen the Guys remove Locking Wheel Bolts in seconds at the Garage when the Locking Nut has broken.

 

[trevskoda]

Think you would be better off getting a Disklock for the Steering wheel & a decent Wheel Clamp like a Nemesis or Bulldog as I've seen the Guys remove Locking Wheel Bolts in seconds at the Garage when the Locking Nut has broken.

Think he is trying to save the wheels from being nicked, not the van.

 

[Burge]

Think he is trying to save the wheels from being nicked, not the van.

As said though not worth having nice wheels soon gone

 

[Pudsey Bear]

Take a wheel off the van and fit a flat spare, safe as houses.

 

[Sonar]

Think you would be better off getting a Disklock for the Steering wheel & a decent Wheel Clamp like a Nemesis or Bulldog as I've seen the Guys remove Locking Wheel Bolts in seconds at the Garage when the Locking Nut has broken.

I have a very heavier steel made clutch and brake pedal lock.
Not easy to fit and i would think very hard to get off due to how tight it fits and where it is fitted.

I am getting the level system fitted next Friday and then thought if it is already jacked up then i have done more than half of the work if someone decides to steal the wheels and new tyres.

 

[HurricaneSmith]

Not sure about that. I always break the wheel nuts whilst on the ground, and only then jack the vehicle to remove it.

 

[Pudsey Bear]

That's the proper way to do it.

 

[Sonar]

With a torque battery tool it will take seconds to remove all the bolts when jacked up.

With the above it matters not if there on the ground or not .

Thieves hardly use a spanner to steal wheels.

 

[Sonar]

Thanks everybody for your help it was as suggested 14 mm threads.
Now requires a 17 mm socket and bar. On order
The old wheel bolts were and are 16 mm with a 24 mm socket.
So all sorted now thanks again

 

[Pudsey Bear]

Thanks everybody for your help it was as suggested 14 mm threads.
Now requires a 17 mm socket and bar. On order
The old wheel bolts were and are 16 mm with a 24 mm socket.
So all sorted now thanks again

Confused?

 

[Sonar]

Confused?

Must have been a private message I got.

However thanks to everyone that looked at the thread then.