mistericeman
Full Member
- Messages
- 767
Yes.....
Ignition on (engine not running) and fan on 1/2/3 and wiggle connector....
If it bursts into life....
Then its just a bad connection.
Ideally unclip it (struggle with bloody awkward design locking clip)
And spray with electrical cleaner before replacing.
Ignition on (engine not running) and fan on 1/2/3 and wiggle connector....
If it bursts into life....
Then its just a bad connection.
Ideally unclip it (struggle with bloody awkward design locking clip)
And spray with electrical cleaner before replacing.