Hymer flyscreen roller broken

  • Thread starter Deleted member 1430
  • Start date

Deleted member 1430

Guest
Hi
I pulled down the flyscreen on a side window and after a crack realised the cord had broken. I manually rolled the flyscreen back up and the blind still goes up ok. Any ideas on a repair/replacement? I can see 2 screws each side to allow the blind/screen to slide up and down but the rest of the unit does not have any obvious release screws. The motorhome is a 1998 Hymer E690. Has anyone any experience of repairing these blinds before I attempt taking it apart?
 
Can you add any pictures, it may help if someone has the same type ?
 
Thanks for your replies. I am still unsure of how to remove the cover. There are no obvious screws or places to prise off from hidden clips.
 
Is it a case of carefully prising this corner off. Sorry to appear dumb but until this cover comes off I won't have access to the cassette. The older models had screws but obviously the upgrade is much smoother.
 
Thanks. I agree. I will try to prise open the perforated panels tomorrow.
 
Thanks everyone. The strips came of easily. 24 screws! I discovered that the retaining clip had broken on the flyscreen tensioning rod. I have made a temporary repair and ordered a replacement, which I should have in about 3 weeks. Thanks again for the advice and support that gave me the confidence to sort it out.
 
You must log in or register to reply here.

Users who viewed this discussion (Total:0)

Back
Top