tonybvi
Full Member
- Messages
- 1,143
One end of the coiled spring (circled red) has come adrift on my habitation door lock (which is why it looks partially unwound) meaning the door opening mechanism doesn’t pull the black plastic catch far enough round to open the door. I can only open it from the inside by manually pulling the catch further round, which is what the spring is meant to do. However I can’t work out where the spring should be attached - possibly hole 1,2 or 3 in the photo.
Is anybody familiar enough with this lock to advise which hole or maybe post a photo of their identical lock? This lock is on a Hymer Mli and the only identification I can see is the manufacturer name “Bauer” on the door window. The lock is normally covered by a white cover held in place by 4 clips and is really easy to remove.
Any help or suggestions would be appreciated.
Thanks, Tony


Is anybody familiar enough with this lock to advise which hole or maybe post a photo of their identical lock? This lock is on a Hymer Mli and the only identification I can see is the manufacturer name “Bauer” on the door window. The lock is normally covered by a white cover held in place by 4 clips and is really easy to remove.
Any help or suggestions would be appreciated.
Thanks, Tony

